|
Product Details:
|
| Air Pressure Adjusting Button: | Adjust Air Pressure With One Screw | Suitable For: | 200g-500g Cardboard |
|---|---|---|---|
| Fixed Aluminum Block: | 2cm | Type: | Pneumatic |
| Max. Speed: | 4500RPM | Intake Air Pressure: | 0.8KPA |
| Air Pump Parameters: | 3000W | Chain Material: | 61 ° Imported Pure White Steel |
| Highlight: | 4500 Rpm Cardboard Box Cutting Machine,500g Cardboard Box Cutting Machine,4500 Rpm Corrugated Cardboard Cutting Machine |
||
Corrugated Paperboard Pneumatic Strip Machine Cardboard Trimming Tool 4500 Rpm
Product Parameter
| Model | Upgraded Waste Stripper |
| Optional chain | Large teeth/middle teeth/single teeth(If there are no special requirements, the chain is usually sent in middle teeth) |
| Product speed | 4500r/min |
| Intake air pressure | 0.8KPA |
| Air pump parameters | 3000W |
| Product color | Silver |
| Product Packaging | Double-layer carton |
Chain process: Each chain tooth is cut by wire cutting and washing process, and then riveted into strips by hand.
Chain material: 61 ° imported pure white steel, durable and wear-resistant.
Motor: Imported genuine strong version of Taiwan motor, 4500 rpm, strong strength, suitable for cleaning up all paper waste edges!
Fixed aluminum block: 2cm thickened and widened front shell fixed aluminum block, making the machine safer and more stable when using!
Mirror stainless steel front case, exquisite workmanship. Front shell opening design, fit the product, more easy to remove waste
Return handle, stable and fall resistant, safe and skid resistant
Ergonomic design,long time work without fatigue
Air pressure adjusting button: adjust air pressure with one screw
Operation steps:
1. One hand grasps the arched handle of the upper part of the machine to ensure that the machine does not swing loosely, and the other hand gently holds the pneumatic motor.
2. Fingers press the motor elastic switch, the motor begins to rotate, the chain begins to move, the greater the pressure, the faster the speed, the requirements of pressing to the end, until the speed stabilizes, you can prepare to start the waste work.
3. Put the front bevel of the rotating chain horizontally above the waste edge, hold it tightly to keep the machine from swinging back and forth, left and right, and at the same time force downwards, you can see the waste edge separated from the paper stack.
4. After the end of the waste, the finger releases the elastic switch and the motor stops rotating.
5. When stopping the use of the waste cleaning machine, you must first cut off the air source, and then press the switch to release the residual air to prevent injury. Hang the machine under the designated bracket to avoid improper bumping and damaging the chain.
Contact Person: Ms. Christina
Tel: 86-13763260555
