|
Product Details:
|
| Applicant: | Corrugating Rolls | Based On: | Perfluoropolyether (PFPE), Polytetrafluoroethylene(PTFE) |
|---|---|---|---|
| Minimum Operating Temperature: | -30 ° C/-22 ° F | Maximum Service Temperature: | 220 ° C/428 ° F |
| Texture: | Homogenization | Color Range: | White |
| Density, JIS K2249, 20 °C: | Approximate Value 1.95 G/cm | NLGI Grade, JIS K2220.7, 25 ° C, 60W: | 2 |
| Kinematic Viscosity, JIS K 2283, 40 °C: | Approximate 230 Mm2/s | Approximate 230 Mm2/s: | Approximate 24 Mm2/s |
| Highlight: | Lubricant 2325 Corrugated Machine Spare Parts,Kluber Grease Corrugated Machine Spare Parts,Kluber Grease Corrugating Rolls |
||
Kluber Grease Lubricant 2325 For Corrugating Rolls Corrugated Machine Spare Parts
Packing specification
|
NOXLUB BF2325 |
|
| Cartridge | 750g |
| Cartridge | 800g |
| Canned | 1kg |
| Barrel | 20kg |
Product Parameter
| Model | NOXLUB BF2325 |
| Chemical composition, base oil type | PFPE |
| Chemical composition, thickener | |
| Minimum operating temperature | -30 °C / -22 °F |
| Maximum operating temperature | 220 °C / 428 °F |
| Color | White |
| Texture | homogeneous |
| Density,JIS K2249, 20 °C | approx.1.95 g/cm3 |
| NLGI grade,JIS K2220.7, 25°C, 60W | 2 |
| Operating viscosity,JIS K2283,40°C | approx.230 mm2/s |
| Operating viscosity,JIS K2283,100°C | approx.24 mm2/s |
| Oil separation, based on JIS K2220.11,24hours/200°C | <=15 wt% |
| Evaporation Loss Rate, Internal Test Method,5hours/200 °C | <=3.0 wt% |
| Corrosion of copper,JIS K2220.9,(lubricant),24hours/120 °C | No visible color change (black or green) |
| Oxidative stability,JIS K2220.12,100小时/99 °C | <=0.03 Mpa |
| Low temperature starting torque,JIS K2220.18,-30 °C | starting torque＜=90 N-cm running torque＜=70 N-cm |
| Shelf Life - Store in unopened original container in a dry, frost-free place | 60months |
Application Characteristics
Precautions for use
To optimize the lubrication effect, we recommend cleaning and drying with petroleum solvent 180/210, and then cleaning the lubrication point with Klüberalfa XZ 3-1.
Then dry all residual solvents with clean, dry compressed airor hot air.
For initial lubrication, the lubrication point must be very clean and free of any grease, sweat and dirt.
NOXLUB BF2325 can be directly applied to lubricating points by means of brushes, scrapers or grease liquors.
Contact Person: Ms. Christina
Tel: 86-13763260555
