|
Product Details:
|
| Applicant: | Corrugating Rolls | Based On: | Perfluoropolyether (PFPE), Polytetrafluoroethylene(PTFE) |
|---|---|---|---|
| Minimum Operating Temperature: | -30 ° C/-22 ° F | Maximum Service Temperature: | 220 ° C/428 ° F |
| Texture: | Homogenization | Color Range: | White |
| Highlight: | Homogeneous Corrugated Machine Spare Parts,1kg Lubricant Corrugated Machine Spare Parts |
||
Corrugated Machine Spare Parts KLUBER NOXLUB Grease 800g 1kg Lubricant
Product Parameter
| Model | NOXLUB BF2325 |
| Chemical composition, base oil type | PFPE |
| Chemical composition, thickener | |
| Minimum operating temperature | -30 °C / -22 °F |
| Maximum operating temperature | 220 °C / 428 °F |
| Color | White |
| Texture | homogeneous |
| Density,JIS K2249, 20 °C | approx.1.95 g/cm3 |
| NLGI grade,JIS K2220.7, 25°C, 60W | 2 |
| Operating viscosity,JIS K2283,40°C | approx.230 mm2/s |
| Operating viscosity,JIS K2283,100°C | approx.24 mm2/s |
| Oil separation, based on JIS K2220.11,24hours/200°C | <=15 wt% |
| Evaporation Loss Rate, Internal Test Method,5hours/200 °C | <=3.0 wt% |
| Corrosion of copper,JIS K2220.9,(lubricant),24hours/120 °C | No visible color change (black or green) |
| Oxidative stability,JIS K2220.12,100小时/99 °C | <=0.03 Mpa |
| Low temperature starting torque,JIS K2220.18,-30 °C | starting torque＜=90 N-cm running torque＜=70 N-cm |
| Shelf Life - Store in unopened original container in a dry, frost-free place | 60months |
Product Description
NOXLUB BF2325 is a high performance grease specially developed for the corrugated paper industry.
The product is compatible with most plastics and rubbers. It is a grease based on perfluoropolyether and as a thickener, and is generally neutral to rubber and plastic parts (except fluoroelastomers).
Even so, we recommend conducting compatibility testing with the material prior to mass application.
Precautions for use
To optimize the lubrication effect, we recommend cleaning and drying with petroleum solvent 180/210, and then cleaning the lubrication point with Klüberalfa XZ 3-1.
Then dry all residual solvents with clean, dry compressed airor hot air.
For initial lubrication, the lubrication point must be very clean and free of any grease, sweat and dirt.
NOXLUB BF2325 can be directly applied to lubricating points by means of brushes, scrapers or grease liquors.
Contact Person: Ms. Christina
Tel: 86-13763260555
